 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HMC340LP5 / 340LP5E v01.0705 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Typical Applications The HMC340LP5 / HMC340LP5E Dual Mixer is ideal for: * Wireless Infrastructure * Wireless Local Loop * Image Reject Mixer * I/Q Modulator Features Conversion Loss: 8.0 dB LO/RF Isolation: 45 dB LO/IF Isolation: 33 dB Input IP3: +20 dBm Conversion Gain Balance: 0.1 dB 5x5 mm QFN SMT Package 12 MIXERS - SMT * SSB Modulator Functional Diagram General Description The HMC340LP5 & HMC340LP5E are doublebalanced dual mixers covering 1.7 - 4.5 GHz RF/LO range. This passive MMIC mixer is constructed of GaAs Schottky diodes and on-chip baluns. The device can be used as an upconverter, downconverter, biphase (de)modulator, or phase comparator. The mixer symmetry of the HMC340LP5 & HMC340LP5E make it an ideal candidate for single sideband or image rejection applications. The consistent MMIC performance will improve system operation and assure regulatory compliance. A low cost, leadless 5x5 mm QFN surface mount package (LP5) houses the dual MMIC mixer IC. Electrical Specifications, TA = +25 C, As a Function of LO Drive Parameter Min. Frequency Range, RF & LO Frequency Range, IF Conversion Loss Conversion Gain Amplitude Balance Noise Figure (SSB) LO to RF Isolation LO to IF Isolation IP3 (Input) 1 dB Gain Compression (Input) 30 25 Typ. 1.7 - 4.5 DC - 1.5 8 0.10 8 45 33 20 12 10 0.25 10 40 33 LO = +13 dBm IF = 100 MHz Max. Min. Typ. 3.4 - 3.8 DC - 1.5 8 0.10 8 47 38 23 13 10 0.25 10 Max. GHz GHz dB dB dB dB dB dBm dBm Units * Unless otherwise noted, all measurements performed as single channel downconverter. 12 - 208 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC340LP5 / 340LP5E v01.0705 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Single Channel: Isolation @ LO = +13 dBm 0 RF TO IF LO TO RF LO TO IF Single Channel: Conversion Gain vs. Temperature @ LO = +13 dBm 0 CONVERSION GAIN (dB) -5 ISOLATION (dB) -15 -10 -30 -15 +25C +85C -40C -45 -20 1 1.5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) -60 1 1.5 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz) 12 MIXERS - SMT Single Channel: Conversion Gain vs. LO Drive 0 Single Channel: Return Loss @ LO = +13 dBm 0 CONVERSION GAIN (dB) RETURN LOSS (dB) -5 -5 -10 -10 -15 LO= +9 dBm LO= +11 dBm LO= +13 dBm LO= +15 dBm -15 LO RF -20 1 1.5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) -20 1 1.5 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz) Single Channel: IF Bandwidth @ LO = +13 dBm 0 Single Channel: Input P1dB vs. Temperature @ LO = +13 dBm 15 14 INPUT P1dB (dBm) -5 RESPONSE (dB) 13 12 11 10 9 -10 -15 RETURN LOSS CONVERSION GAIN +25C +85C -40C -20 0 0.5 1 1.5 IF FREQUENCY (GHz) 2 8 1 1.5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 12 - 209 HMC340LP5 / 340LP5E v01.0705 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Single Channel: Input IP3 vs. Temperature @ LO = +13 dBm 30 Single Channel: Input IP3 vs. LO Drive 30 25 INPUT IP3 (dBm) INPUT IP3 (dBm) 25 20 20 15 LO= +11dBm LO= +13dBm LO= +15dBm 15 +25C +85C -40C 12 MIXERS - SMT 10 1.5 2 2.5 3 3.5 4 4.5 5 10 1.5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) RF FREQUENCY (GHz) Single Channel: Input IP2 vs. LO Drive 70 65 60 INPUT IP2 (dBm) Single Channel: Input IP2 vs. Temperature @ LO = +13 dBm 60 55 INPUT IP2 (dBm) 50 45 40 35 30 1.5 +25C +85C -40C 55 50 45 40 35 30 1.5 LO= +11dBm LO= +13dBm LO= +15dBm 2 2.5 3 3.5 4 4.5 5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) RF FREQUENCY (GHz) Single Channel: Upconverter Conversion Gain vs. LO Drive 0 Single Channel: Upconverter IP3 vs. LO Drive 30 CONVERSION GAIN (dB) 25 -5 INPUT IP3 (dBm) 20 -10 15 LO= +11dBm LO= +13dBm LO= +15dBm -15 LO= +9dBm LO= +11dBm LO= +13dBm LO= +15dBm 10 -20 1.5 2 2.5 3 3.5 4 4.5 5 5 1.5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) RF FREQUENCY (GHz) 12 - 210 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC340LP5 / 340LP5E v01.0705 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Dual Channel: Channel to Channel Isolation -60 -65 -70 ISOLATION (dB) -75 -80 -85 -90 -95 -100 1.5 RF1 TO IF2 RF2 TO IF1 Dual Channel: Conversion Gain Amplitude Balance 1 0.75 AMPLITUDE BALANCE (dB) 0.5 0.25 0 -0.25 -0.5 -0.75 -1 1 1.5 2 2.5 3 3.5 FREQUENCY (GHz) 4 4.5 5 2 2.5 3 3.5 4 4.5 5 12 MIXERS - SMT RF FREQUENCY (GHz) Dual Channel: LO1 to LO2 Isolation -20 Dual Channel: RF1 to RF2 Isolation -20 -30 ISOLATION (dB) ISOLATION (dB) 2 2.5 3 3.5 4 4.5 5 -30 -40 -40 -50 -50 -60 -60 -70 1.5 -70 1.5 2 2.5 3 3.5 4 4.5 5 LO FREQUENCY (GHz) RF FREQUENCY (GHz) Dual Channel: IF1 to IF2 Isolation -20 -30 -40 ISOLATION (dB) -50 -60 -70 -80 -90 -100 0 0.5 1 IF FREQUENCY (GHz) 1.5 2 Harmonics of LO LO Freq. (GHz) 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 nLO Spur at RF Port 1 46 41 46 55 50 43 37 33 2 33 28 29 36 44 48 54 53 3 66 53 47 57 57 57 64 69 4 58 64 69 76 74 65 78 81 LO = +13 dBm Values in dBc below input LO level measured at RF Port. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 12 - 211 HMC340LP5 / 340LP5E v01.0705 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Absolute Maximum Ratings RF / IF Input LO Drive Channel Temperature Continuous Pdiss (T = 85C) (derate 16.55 mW/C above 85C) Thermal Resistance (RTH) (junction to package base) Storage Temperature +13 dBm +27 dBm 150C 1.07 W MxN Spurious Outputs nLO mRF 0 1 2 3 0 xx 15 75 76 76 1 8 0 68 76 77 2 22 47 75 77 76 3 22 42 69 73 76 4 39 39 71 77 76 60.4 C/W -65 to +150 C -40 to +85 deg C 4 12 MIXERS - SMT Operating Temperature RF = 3.5 GHz @ -10 dBm LO = 3.6 GHz @ +13 dBm All values in dBc below IF power level ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED Package Information Part Number HMC340LP5 HMC340LP5E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic LAND PATTERN. Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] H340 XXXX H340 XXXX [2] [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX 12 - 212 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC340LP5 / 340LP5E v01.0705 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Pin Descriptions Pin Number 1, 2, 4, 5, 7-11, 13-18, 20, 21, 23-28, 30-32 Function Description No Connection. These pins may be connected to RF ground without affecting performance. Interface Schematic N/C 3, 6 LO1, LO2 LO Port: This pin is DC coupled and matched to 50 Ohm from 1.7 to 4.5 GHz. 12 MIXERS - SMT 12 - 213 12, 29 IF2, IF1 IF Port: This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose values has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 4mA of current or die non-function and possible die failure will result. 19, 22 RF2, RF1 RF Port: This pin is DC coupled and matched to 50 Ohm from 1.7 to 4.5 GHz. Package Bottom GND Package bottom must be connect to RF/DC ground. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC340LP5 / 340LP5E v01.0705 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Application Circuit for use as an I/Q Modulator 12 MIXERS - SMT Application Circuit for use as an IRM Mixer 12 - 214 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC340LP5 / 340LP5E v01.0705 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Evaluation PCB 12 MIXERS - SMT List of Material for Evaluation PCB 107482 [1] Item J1 - J6 U1 PCB [2] Description PCB Mount SMA RF Connector HMC340LP5 / HMC340LP5E Dual Mixer 107467 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 12 - 215 |
Price & Availability of HMC340LP505
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |